Organic Chemistry I


CHEM 2055: Beginning organic chemistry course recommended for science majors and pre-professional students. This course includes aliphatic and aromatic nomenclature, structure, stereochemistry,selected mechanisms and reactions with an introduction to interpretive spectroscopy. Lab three hours per week.  Lab recitation one hour per week.

Academic Dishonesty
ADA Statement
Assigned Problems
Attendance
Evaluation
Institutional Statement
Instruction Method
Objectives
Pre-Requisites
Safety
Schedule
Syllabus Modification Policy
Text & Required Material
Textbook Website
Withdrawal & Incomplete

Messages from the Instructor


COURSE PRE-REQUISITES: CHEM 1515 (General Chemistry II).

NEXT COURSE IN SEQUENCE: CHEM 2155 - Organic Chemistry II

TEXT: Organic Chemistry, Fourth Ed., 1999. Wade. Prentice Hall, Inc. ISBN
0-13-922741-5

LABORATORY MANUAL: Experimental Organic Chemistry: A Miniscale & Microscale Approach, Second
Ed., 1998. Gilbert & Martin. Saunders College Publishing. ISBN 0-03-020632-4

OTHER REQUIRED MATERIALS: Laboratory Safety Goggles; Laboratory Jacket.

COURSE OBJECTIVES:
    Upon completion of this course, and within the limited parameters of the course, the student will be able to
demonstrate an understanding, (by experimental demonstration, discussion, illustration, definition and problem
solving) of the following chemical concepts:
        1. Structure, nomenclature, and conformational analysis of alkanes and cycloalkanes
        2. Acid-Base Reactions
        3. Isomerism, chirality, enantiomerism, and diastereomerism
        4. Structure and physical properties of alkenes
        5. Radical halogenation of alkanes
        6. Chain initiation, propagation, and termination
        7. Organometallic compounds
        8. Organic Mechanisms
        9. Stereochemistry
        10. Kinetics
        11. Structure and Reactivity
        12. Nucleophilic substitutions
        13. ß-elimination
        14. Alcohol and Thils
        15. Alkynes
        16. Ethers, Sulfides, and Epoxides
        17. Spectrometry

INSTRUCTION METHOD:
    The lecture/lab method is used as the main instruction method. Lectures are designed to facilitate an
understanding of topics covered in the text. The most important concepts are reviewed in summary problems at
the end of each chapter. Most test questions will be designed to determine a student's ability to demonstrate a
knowledge of each of these areas of study and will be based on problems given at the end of each chapter. The
instructor may emphasize or omit certain sections of each chapter. A number of problems and questions
covering the topics of study are given at the end of each chapter in the textbook. The instructor, on occasion,
will eliminate or give additional problems to be solved. Proficiency in answering these questions and solving
problems is necessary in order to perform well on quizzes and exams. Assigned problems will not be picked
up or graded; however, many similar problems will occur on quizzes and exams. Laboratories are designed to
augment and illustrate lecture topics.

ATTENDANCE POLICY:
    Attendance in this course is necessary for the student to gain the full benefit of information presented in class.
Regular attendance of any college class is of value to the student. Consistent lecture notes, familiarity with the
teachers approach to the instruction and testing relationship, chronological modifications as the course
progresses, general course announcements, and regular casual contact with other students are only a few of the
reasons why regular attendance is strongly advised. The recitation period is actually a part of the allotted
laboratory time. Its purpose is to prepare students for the actual laboratory procedure. This includes: A review of
the laboratory procedure, materials and supplies; explanation of terminology and expected outcomes; problem
solving; questions and especially safety precautions. Students who do not attend recitation will not be
considered fully prepared for the subsequent laboratory exercise(s) and may not receive full credit for the
laboratory exercise(s) to which the recitation pertains.

EVALUATION TECHNIQUES:
    Exams, projects, final: Four unit exams worth 100 points each will be given during the lecture or recitation
periods. Exams will be designed to test the student's ability to answer the previous unit's assigned problems and
objectives. In addition, some questions from the laboratory may appear on an exam. The study of chemistry
requires progressive application of previously learned information. Knowledge required for early exams will
often be needed for application and problem solving on later exams. Occasionally questions or problems may be
asked for which there was no objective or assigned chapters, therefore regular attendance will be required.
Tentative exam schedule is given below. A final exam will be given during final exam week according to the final
examination schedule. All sections will follow the published schedule. A comprehensive final exam is required
for all students.
    Make-up exams: Make-up exams are given at the discretion of the instructor. Students should consult with the
instructor prior to missing an exam. Generally, students may request to make up any missed exam. However, the
make-up request must be an acceptable reason for missing the scheduled test time. In addition, make-up tests
should be taken within one week following the scheduled time for the missed test. It is the responsibility of
each student to inform the instructor of intentions to make up any missed test.
    Laboratory: Students will earn a maximum of twenty (20) course points for each laboratory exercise correctly
completed. Laboratory report sheets, contained in the laboratory manual, are to be handed in at the completion
of each laboratory unless otherwise stated by the instructor. Students will frequently be required to work in
small groups to complete a laboratory exercise. When this occurs, feel free to exchange information and help
group members complete their report sheets. Report sheets will NOT be accepted by the instructor until the
laboratory group has cleaned and returned all glassware and equipment to the proper place and cleaned off their
laboratory desks and work space. To properly prepare for laboratory, students should read and review each
laboratory exercise prior to coming to class. Unless otherwise indicated by the instructor, all exercise
questions and associated problems should be completed by the end of the laboratory period. Students are
encouraged to complete associated exercises prior to coming to class whenever possible.
    Laboratory Exercises: As stated above, students earn up to a maximum of 20 course points for each laboratory
report sheet correctly completed at the end of each laboratory session. Incomplete or incorrect report sheets
will be graded accordingly. Students will receive no credit unless laboratory equipment has been cleaned and
returned to its proper place and laboratory work space cleaned at the end of the lab.
            A.    Students who do not attend a laboratory cannot receive credit for
                    the laboratory nor can laboratory exercises be made up.
            B.    Students who do not provide and wear goggles during lab will not be permitted to remain in the laboratory and
                    will receive a zero for that lab period.
            C.    Failure to follow all safety procedures will result in point deductions from lab.
    Laboratory Final Exam: Upon completion of the formal lab exercises, a comprehensive, laboratory final exam
will be given. This exam is worth a maximum of 50 points.

EVALUATION:
    Your final grade will be determined by the total number of course grade points earned during the semester.
Course grade points are earned as follows:
    ITEMS 
  POINTS
 Four exams @ 100 points each
 400
 Lab Safety Quiz
10
 Twelve Laboratories @ 20 points each
240
Lab Final Exam
50
Final Exam (comprehensive)
100
Total Course Points
800
*This total does not include points possible through extra credit. Any extra credit points received will be added
   to each student's total for determining the final grade.

    Final Grade - Grading Scale: Each student's final letter grade will be determined using the following numerical scale.
 
 Letter Grade
Percent
 Course Points
A
90 - 100
720 - 800
B
80 -89
640 - 719
C
70 - 79
560 - 639
D
60 - 69
 480 - 559
F
<60
<479

SAFETY PRECAUTIONS AND LABORATORY REGULATIONS:
    1.    Maintain a mature, responsible attitude at all times when in the laboratory. For the safety of the class,
           unauthorized experiments are prohibited.
    2.   Wear protective goggles glasses and a lab jacket AT ALL TIMES in the laboratory unless directed otherwise
           by the instructor.
    3.    Never eat or smoke in the laboratory.
    4.    Do not point your test tube at your neighbor or yourself when heating substances. A suddenly formed bubble
           of vapor may eject the test tube's contents violently.
    5.    Never taste a chemical or solution unless directed to do so by the instructor.
    6.    Do not hold your face directly over a container when smelling odors. Instead, fan a little of the vapor toward
           your nose by sweeping your hand over the top of the container.
    7.    Maintain an orderly, clean laboratory desk. Wash and return all materials to their proper place at the end of
           the lab. Wash and wipe off the desk top at the close of the lab period.
    8.    Discard all excess and waste chemicals as directed by the instructor.
    9.    Leave reagent bottles at side shelves. Bring test tubes or beakers to the shelf for transferring chemicals and
           carrying them to your desk.
    10.  Read the label TWICE before taking anything from a bottle.
    11.  NEVER return unused chemicals to the stock bottle.
    12.  Do not insert pipets or other materials into stock bottles. Pour the solution into a beaker first. This avoids
           contamination of the stock solutions.
    13.  Do not lay the stopper of a bottle down as it may pick up impurities which could be transferred to the stock
           solution.
    14.  Before leaving the laboratory be sure the gas and water are completely shut off. Return all special equipment
           to its proper place.
    15.  Long hair should be tied back when working in the laboratory.
    16.  No bare feet or sandals allowed in the lab.
    17.  All injuries, no matter how slight, should be reported to the instructor as soon as possible.
    18.  Be aware of safety equipment and its use in the lab. This includes fire extinguisher, fire blankets, first aid
           kits, eye wash and safety shower.
    19.  Never assume a spill is safe to clean up. Notify the instructor of any spills or unknown materials.
    These safety procedures and other safety and emergency procedures will be discussed, as they pertain, in
    laboratory.

WITHDRAWAL AND INCOMPLETE GRADES:
    Withdrawal: Any student may drop, withdraw, or change to audit on or before the drop date. Withdrawals must be processed through the Admissions office and require the signature of an advisor within the division. All students remaining on the class roll after the published drop date will receive a letter grade.

    Incomplete: The grade of "I" represents incomplete work. It may not be used as a substitute for a failing grade.  The request for an "I" grade is initiated by the student and granted to eligible students at the discretion of the instructor. In order to be considered for an "I" grade, a student must have successfully completed at least 70% of the coursework and be unable to finish the course for reasons beyond his/her control.

AMERICANS WITH DISABILITIES ACT STATEMENT:
    If any member of the class feels that he/she has a disability and needs special accommodations of any nature
whatsoever, the instructor will work with you and the Office of the Vice Provost for Student Affairs to provide
reasonable accommodations to ensure that you have a fair opportunity to perform in this class. Please advise the
instructor of such disability and the desired accommodations at some point before, during or immediately after
the first scheduled class period.

ACADEMIC DISHONESTY OR MISCONDUCT:
    Academic dishonesty or misconduct is not condoned nor tolerated at institutions within the Oklahoma State
University system. Academic dishonesty is behavior in which a deliberately fraudulent misrepresentation is
employed in an attempt to gain undeserved intellectual credit, either for oneself or for another. Academic
misconduct is behavior that results in intellectual advantage obtained by violating specific standard, but without
deliberate intent or use of fraudulent means. Academic dishonesty or misconduct cases are governed by the
OSU-OKC Campus Student Rights and Responsibilities Code (see Student Handbook).

SYLLABUS MODIFICATION STATEMENT:
    Faculty has the right to change or modify the course syllabus materials during the academic year. Any changes
will be shared with students. Every attempt will be made to provide those changes in writing.

INSTITUTIONAL STATEMENT:
    Each student is responsible for being aware of the information contained in the OSU-OKC Catalog, Student
Handbook and semester information listed in the Class Schedule. You are to adhere to the tobacco and drug
policies of the institution.
 



Last Updated on August 25, 2000 by Armando L. Cruz-Rodz, Ph.D.